Mimaki CG-130SRIII

0 reviews / Write a review
Brand: Mimaki
Availability: In stock
USD 2 100.00
Quantity: 

Short Description

Mimaki CG-130SRIII

Product Description

Extreme curve cutting speed

Affordably priced but technologically advanced.
Achieve the highest return on your investment.

Main Features
    A best-in-class cutting pressure of 500g for a wider range of materials
    Up to 2 times the curve cutting speed increases productivity
    Event Notification function for remote monitoring
    - Plot start/end, error/warning message
    Continuous Crop Mark Detection for precise stickers and seals.
    New Segment Compensation, which detects intermediate crop marks, enables accurate contour cutting of long-length prints
    Upgrade of firmware can be done quickly and easily by user.
    Ethernet connection for LAN use as well as USB2.0 and RS-232C

CG-60SRIII
Effective cutting area 606mm (23.8")
CG-100SRIII
Effective cutting area 1,070mm (42.1")
CG-130SRIII
Effective cutting area 1,370mm (53.9")

  CG-60SRIII CG-100SRIII CG-130SRIII
Acceptable sheet width 90~740 mm 90~1,250 mm 90~1,550 mm
Effective cutting area 606 mm 1,070mm 1,370mm
Maximum speed Cutting: 70 cm/s, Moving: 100 cm/s
Adjustable speed range 1 - 10 cm/s (1 cm/s step adjustment), 1 - 70 cm/s( 5 cm/s step adjustment)
Mechanical resolution X direction: 2.5 μm、Y direction: 5 μm
Command resolution 25 μm or 10μm( MGL-IIc) / 100 μm, 50 μm( MGL-Ic1)
Repeatability *1 ± 0.2 mm / 2 M
Effective Repeatability *2 586 mm × 2 M 1,050 mm × 2M 1,350 mm × 2M
Maximum pressure 500g
Range
of down pressure
Cutter 10 - 20 g(2 g step), 20 - 100 g(5 g step), 100 - 500g(10g step)
Pen 10 - 20 g(2 g step), 20 - 100 g(5 g step), 100 - 150g(10 g step)
Acceptable sheet *2 Vinyl sheet, Fluorescent type vinyl sheet, Reflective sheet, Rubber sheet
Acceptable tool *3 Cutter, Ball-point pen
Type of command MGL-IIC / MGL-Ic1
Interface USB2.0、RS-232C、Ethernet
Receiver buffer size 27 MB Standard (When sorting, 17 MB)
Operational environment 5 - 35 ℃, 35 - 75 %(Rh), Non-condensation
Power requirement AC 100 V - 240 V, 145 VA or less
Dimensions(W×D×H) 1,030 × 430 × 335 mm
(1,030 × 430 × 1,185 mm)*4
1,530 × 580 × 1,150 mm 1,830 × 580 × 1,150 mm
Weight 24kg 41kg 46kg
Stand Optional equipment Standard equipment Standard equipment

*1: Except for media expansion and contraction due to temperature.
*2: Operated with Mimaki specified media, cutter and cutting conditions.
Thickness of rubber and its cutting speed are limited. Guaranteed accuracy environment: Temperature 12-25℃, Humidity 45-65%
*3: Our dedicated cutter blade and specified commercial ball-point pens are available. (Drawing quality of ball-point pen is not warranted)
*4: When equipped with the optional stand (OPT-0231)

Copyright www.arizaprint.com